COMMERCIAL COOLING SYSTEM

Urgent Air’s Cooling Systems Multi-Point inspections include the following:

Air Conditioning (Straight Cool):

  • Inspect voltage

  • Inspect amp draw

  • Inspect proper fuse sizing

  • Inspect all electrical connections

  • Inspect safety controls and operations

  • Inspect the thermostat and operation

  • Inspect filter conditions

  • Address any customer concerns

  • Inspecting blower motor amps

  • Inspect blower motor temperature

  • Inspect blower motor bearings

  • Inspect blower motor capacitor

  • Inspect blower wheel condition

  • Inspect the supply duct

  • Inspect the return duct

  • Inspect supply air temperature

  • Inspect return air temperature

  • Inspect air flow

  • Inspect system noise and operation

  • Adjust vents if requested

  • Inspect the condensate drain and vent

  • Clear the condensate drain of any debris

  • Inspect drain overflow

  • Inspect dryers

  • Inspect metering devices

  • Confirm pressures, if an issue is suspected

  • Inspect service valves

  • Inspect condition of the evaporator coil

  • Inspect condition of the condenser coil

  • Wash condenser coil with water if available

  • Inspect contactor

  • Inspect condenser fan motor amps

  • Inspect condenser fan motor capacitor

  • Inspect condenser fan motor bearings

  • Inspect condenser fan motor temperature

  • Inspect condenser fan blade condition

  • Inspect compressor amp draw

  • Inspect compressor run/start components

  • Inspect suction temperature of compressor

  • Inspect discharge temperature of compressor

  • Inspect and adjust belts

  • Inspect the economizer

  • Inspect smoke detection

Air Conditioning (Heat Pump):

  • Inspect voltage

  • Inspect amp draw

  • Inspect proper fuse sizing

  • Inspect all electrical connections

  • Inspect safety controls and operations

  • Inspect the thermostat and operation

  • Inspect filter conditions

  • Address any customer concerns

  • Inspecting blower motor amps

  • Inspect blower motor temperature

  • Inspect blower motor bearings

  • Inspect blower motor capacitor

  • Inspect blower wheel condition

  • Inspect the supply duct

  • Inspect the return duct

  • Inspect supply air temperature

  • Inspect return air temperature

  • Inspect air flow

  • Inspect system noise and operation

  • Adjust vents if requested

  • Inspect the condensate drain and vent

  • Clear the condensate drain of any debris

  • Inspect drain overflow

  • Inspect dryers

  • Inspect metering devices

  • Confirm pressures, if issue is suspected

  • Inspect service valves

  • Inspect condition of the evaporator coil

  • Inspect condition of the condenser coil

  • Wash condenser coil with water if available

  • Inspect contactor

  • Inspect condenser fan motor amps

  • Inspect condenser fan motor capacitor

  • Inspect condenser fan motor bearings

  • Inspect condenser fan motor temperature

  • Inspect condenser fan blade condition

  • Inspect compressor amp draw

  • Inspect compressor run/start components

  • Inspect suction temperature of compressor

  • Inspect discharge temperature of compressor

  • Inspect operation of reversing valve

  • Inspect and adjust belts

  • Inspect the economizer

  • Inspect smoke detection